Italiano English 
modelling resins

Rubbers and resins for modeling

Modeling sector requires products characterized by high fluidity and good mechanical properties. Polyurethane, epoxy resins and silicone rubbers are suitable for the application. Polyurethane and epoxy resins for modeling and for rapid prototipyng, silicone rubbers for the realization of the moulds.

 

Silicone rubbers are used in the modelling sector for moulds production to assure a faithful reproduction of original object shapes and details. The model is obtained by pouring into the moulds the resin or polyurethane rubber chosen for object replication.



SILICONE RUBBERS for modeling

Bi-component pouring silicone rubbers. Excellent reproduction, high elasticity and tearing strenght. Realization of flexible moulds for serial reproduction of resin (polyurethane, polyester), plaster, wax etc…objects (modeling).

Product Description Sheet
SILIMOLD AL 10 Soft silicone (10 shore A). Complex moulds for serial making of small sized resin objects (polyester, polyurethane and epoxy resin), plaster, wax, etc…Moulds for lost-wax foundries. Suitable for "glove peeling" delivery. Moulds for technical articles, modeling.
SILIMOLD AL 20 Medium hardness silicone (20 shore A). High mechanical properties, suitable for the preparation of moulds with a considerable number of undercuts: reproduction of bronze statues (artistic foundry), serial reproduction of complex hand-made resin articles (polyester, polyurethane and epoxy resin), in plaster, natural and synthetic wax, cement (ex. statues, decorative garden articles, decorative candles, prototypes, decorative pottery, rosettes, cornices, imitation wood friezes, etc…). Moulds for technical articles, modeling.
SILIMOLD AL 40 Medium-high hardness silicone (40 shore A). Suitable for the reproduction of large-sized matrices.


SILICONE RUBBERS AD SERIES

Special silicone rubbers characterized by no linear shrinkage, generally used in rapid prototyping sector.

Product Description Sheet
SILIMOLD GE 02 MOULDS – Dielectric Gel.
SILIMOLD ADT 05 Low hardness silicone (8 shore A). COMPLEX MOULDS – Paramedical sector, heel inserts and inserts.
SILIMOLD AD 12 Low hardness silicone (12 shore A). COMPLEX MOULDS – Prototypes and resin, plaster, wax objects. Pad printing.
SILIMOLD AD 20 Medium hardness silicone (20 shore A). COMPLEX MOULDS – Prototypes and resin, plaster, cement objects. Pad printing.
SILIMOLD AD 30 Medium hardness silicone (30 shore A). COMPLEX MOULDS – Prototypes and resin, plaster, wax, pottery objects. Pad printing.
SILIMOLD ADT 40 Medium-high hardness silicone (40shore A). Transparent, high mechanical properties, particularly suitable for making complex moulds in the field of quick prototyping and for making moulds to produce resin articles.
SILIMOLD AD 110 Low hardness silicone (10 shore A). SIMPLE MOULDS – Pad printing.  
SILIMOLD AD 130 Medium hardness silicone (30 shore A). COMPLEX MOULDS – Prototypes and resin, plaster, cement, pottery objects. Pad printing.  
SILIMOLD AD 150 High hardness silicone (50 shore A). Good mechanical properties. Suitable for making moulds in the field of artistic pottery and in the manufacture of very high precision resin or plaster products.


POLYURETHANE RUBBERS

Rubber effect: polyurethane rubbers used for the reproduction of particulars of the models in similar-rubber (ex. tires etc…). Hardness from 25 to 70 Shore A. Pigmentable with special colourings.

Product Description Sheet
POLIMOLD TR 40 Hardness shore A 40 ± 3. COMPLEX MOULDS - Serial reproduction of plaster, cement, pottery objects.
POLIMOLD TR 55 Hardness shore A 55 ± 3. COMPLEX MOULDS - Serial reproduction of cement, plaster, wax hand-made objects. Case moulds production for ceramic and sanitary fixtures.
ELASTOPUR E 70 Hardness shore A 70 ± 3. MOULDS SUBJECTED TO HIGH MECHANICAL STRENGHT - Production case moulds for ceramic and sanitary fixtures.  


POLYURETHANE RESINS for modelling

Bi-component pouring polyurethane resins suitable for modelling, reproduction of toy-soldiers, models in scals of cars, airplanes, ships, armoured cars, etc…The resin high fluidity allow a faithfull reproduction of smallest and complex details. Resin is poured into silicone rubbers moulds, with mixing ratio in weight 100:100 (resin / Hardener).

Product Description Sheet
RESIN PU 087 (HARDENER PUH-887) Special bi-component pourable polyurethane resin. Characterized by low viscosity, high thermic resistance (up to 110°C), low linear shrinkage, quick demoulding, excellent definition. Suitable for producing demonstrative prototypes, foundry patterns (where it is required excellent wear resistance, dimensional stability and high precision), negatives, serial poured hand-made articles, copy models, blister, pilot vacuum thermoforming moulds or similar applications. The resin is pigmentable and highly filleable (using the charge AL 3 H it is possible to obtain low specific weight products). Available standard catalyst for thin layers and slow catalyst for relevant masses.
RESIN PUC 097 (HARDENER PUH-1097) Bi-component polyurethane resin applicable by pouring, pre-filled with special charges, tool workable. Characterized by no linear shrinkage (<0,05%), high scraping and thermic resistance (up to 115°C). Used for the realization of foundry patterns, copy models, moulds and prototype, pilot vacuum thermoforming moulds, in modelling sector (realization of models in scale of cars, ships, airplane, toy soldiers, small objects). Available standard catalyst for thin layers and slow catalyst for relevant masses.
KEMIEPUR 1K 20/240 Single-component aliphatic polyurethane paint, hygrohardening (reticulates under effect of atmospheric moisture ), transparent and glazing paint. Characterized by high superficial hard, abrasion and chalking resistant due to long sun exposure. Suitable for a lasting protection of every mural surface against aggression of chemical agents (acid and alkaline solutions, sea atmosphere, sulphurous anhydride, solvents, oils, etc…) and against concrete carbonation. Anti-scratch high power. After reticulation the product forms an anti-dust film that is very hard, elastic, transparent (anti-yellowing), it endures for a long time and writings or dirtiness are easy to clean (anti-writing paint) using strong detergents or organic solvents: KEMIEPUR 1K 20/240 opposes an impenetrable barrier against these substances.  


POLYESTER RESINS

Product Description Sheet
RESINPOL P 114 Glass and water effect:Transparent resin, anti - yellowing , for the production of panes of glass, lights and for object mounting. Pigmentable with special colourings that keep transparence. To be used with silicone rubber moulds.  
RESINPOL R 601 Resins suitable for the building of static and dynamic composite models of high dimension, high wetting power. Orthoftalic polyester resin for stratification (tixotropic).Owing to its low linear shrinkage is suitable to realize high thickness hand-made compounds. Tixotropic property minimize the tendency of pouring in vertical stratification.Suitable for the production of coachwork features, nautical buildings, sanitary fixtures, industrial components etc…Used for moulding with manual application.
RESINPOL R 302 Resins suitable for the building of static and dynamic composite models of high dimension, high wetting power. Bicomponent tixotropic polyester resin for stratification, isoftalic, low water absorption coefficient, and good resistance to chemical agents. Characterized by a higher flexibility than orthoftalic resins.
RESIN VINILESTERE 922 Resins suitable for the building of dynamic composite models of high dimension, high wetting power. Bicomponent vinilestere tixotropic resin for stratification characterized by high chemical and mechanical resistance, similar to epoxy resins, and a high temperature resistance (more than 110 °C).Applied by manual stratification or with mat and fiberglass, carbon and kevlar. Tixotropic property minimize the tendency of pouring in vertical stratification.


EPOXY RESINS

Suitable in modeling sector for the reproduction of particulars requiring excellent chemical and mechanical properties.

Product Description Sheet
KEMIEPOX NCT 401 Special transparent epoxy resin used to realize water effects for diorama. It can be used on painted surfaces or poured in many layers adding different quantities of colours in transparence for a deep effect. Bicomponent pure epoxy system, transparent, fluid. Anti yellowing.
KEMIEPOX NCT 501L Bi-component pure lamination epoxy resin that cures, with the appropriate hardeners, at room temperature (over 25°C) or at hot. Characterized by excellent mechanical and thermic resistance (over 150°C), low viscosity, excellent wetting, and resistant towards yellow tendency, high surface finish (final surface with no greasiness).


ADHESIVES

Cianoacrylic and neoprenic universal adhesives. Bi-component epoxy and polyurethane adhesives for plastic and metals. Availble for manual use or with appropriate gun with automatic mixer. Setting times variable from 5 to 30 minutes. Epoxy plasters metal effect.

Product Description
DUPLOMIX DM10 Duplomix DM10 Bicomponent epoxy adhesive (resin and hardener). Rapid setting (5 – 10 min.). Good setting on different materials, in particular on metals.
POLIMIX SYSTEM 2K 0990 Specific bi-component tixotropic polyurethane system for structural bonding of rigid plastics.Our special formulations allow adhesion with high crashing ahd cutting resistance. No shrinking and good heat resistance (up to 80°C). Bonding of composite materials. System suitable to bond composite materials and rigid plastics.
VVCOL 40 Medium viscosity one component adhesive.
VVCOL 44 Universal adhesive particularly used in shoe industry, wood plastic, rubbers, moquettes etc.
VVCOL 51 Medium - high viscosity one component adhesive.
VVCOL 66/P Medium - low viscosity one component adhesive.
VVCOL 69 Medium - high viscosity one component adhesive.
VVCOL 98 Low viscosity one component adhesive.
VVCOL 2120 One component cianoacrylic adhesive free from solvents, very rapid setting at room temperature. Excellent adhesion to different supports and nearly all kind of materials.


OTHER PRODUCTS

Product Description
COMPOSITE FABRICS Available a large range of glassfiber, fiber of carbon, kevlar.
RELEASE AGENTS Liquid or spray ecological release agents in for the preparation of particulars in polyurethane resin.
COLOURINGS Colouring concentrate pastes for polyurethane and epoxy systems. Available the covering version or colouring liquid version that keeps the transparence.
SNOW EFFECT Reproduction of snowing landscapes. Simple realization of diorama mixing a normal vinilic glue with hollow microspheres. The product doesn't crumble and doesn't change colour.
   SiteMap | Diritti | Pagamenti | Privacy | Spedizioni
Copyright® Poolkemie - Partita IVA 10633380018