|
Building and industrial flooring include a large range of applications between which the moulds for the production of precasted cement elements, waterproofing (roofs, terraces, basins, aqueducts, streets, car parks etc) the protective coating (facings, bridges, forced ducts), the corrosion proofing of industrial plants, the coating, of different thickness, of domestic and industrial flooring, the structural consolidation of major construction works (bridges, tunnels, viaducts), the civil and monumental restoration. The previous applications require formulations characterized by chemical and atmospheric agents resistance, scraping resistance, waterproofing.
The polyurethane, epoxy, polyester systems are suitable to be used in this sector.
|
| EPOXY RESINS |
Epoxy resins thanks to their excellent mechanical properties are used for paving and for sticking together concrete elements.
|
| Product |
Description |
Sheet |
| KEMIEPOX NCT 301 |
Filled with mineral inert materials for paving, pure for sticking together concrete elements. |
 |
| EPOXY RESINS EPOXFLOOR SERIES FOR PAVING |
Fluid bicomponent epoxy systems for paving. It can be put down on cement, wood, pre-existent floors or on various surfaces. Types: multicoating, screed (mortar coating, mineral charge and resin), spatula, self levelling or simple painting (film). Adding quarts powder or granules it is possible to get pavings with uses. High resistance to crash, wear, waterproof and easy to clean. Thickness from 0,3 mm (for film) up to 10 mm with screed type. Large range of colours.
|
| Product |
Description |
Sheet |
| EPOXFLOOR 50 CNC |
Multi Layer epoxy system for flooring. |
|
| EPOXFLOOR PVA 15/203 |
Self-levelling epoxy product for monolithic floorings. |
|
| EPOXFLOOR RP 30/408 |
Epoxy coating for paving. |
|
| EPOXY RESINS HYDROPOX PK SERIES FOR PAVING |
Bicomponent fluid epoxy systems for paving, suitable for protective and atoxic covering (coating). Water dilutable. Available in different colours. Can be applied with brush, roller or spray.
|
| Product |
Description |
| HYDROPOX PK 201 |
Bicomponent epoxy coating water dilutable suitable for application on damp surfaces, finish with tile effect, extremely resistant to humidity, mould, chemical products and wear. |
| HYDROPOX PK 50-100 |
Transparent epoxy primer in water dispersion, gives superficial hardening and consistency to went off, crumbled and much porous mortars. |
| RUBBER FOR FLOORING |
| Product |
Description |
| POOLFLEX SPR |
Gomma elastomerica per pavimentazioni sportive applicabile a spruzzo. Spessore 1 - 2 mm. |
| POOLFLEX RL |
Gomma elastomerica per pavimentazioni sportive applicabile a rullo od a spatola. Spessore 3 - 4 mm. |
| POOLFLEX SPT 202 AUTOLIVELLANTE |
Gomma elastomerica per pavimentazioni sportive applicabile a rullo. |
| PROTECTIVE PRODUCTS |
| Product |
Description |
Sheet |
| KEMIEPUR 2K WR 140 |
Two-component polyurethane-polyurea protective elastomer, solvent-free and plasticising. Excellent chemical and mechanical properties, abrasion resistance, waterproof but permeable to steam, extreme hardening speed
Suitable for waterproofing road planking and cement surfaces in general, car park coating, coating and waterproofing bridges and viaducts, waterproofing walkable surfaces of roofs and terraces etc…
Use method: clean the surface thoroughly by removing any residue of oil, grease, pre-existing paintings, friable parts. Thickness not low than 3 mm.
Application: applicable by spray with special machines for two-component products.
|
|
| KEMIEPUR 2K RP 20/322 |
Pigmented two-component glazing coating, based on polyurethane resins and aliphatic isocyanates (reticulating agent ).
Outstanding hardness and abrasion resistance. High resistance to atmospheric agents, chalking, acid and alkali solutions, mineral oils, fuels, sea water etc. Used as protective painting of tanks, pits, industrial plants, aeronautical and ship structures, railway coaches, motorway works, concrete prefabricated, swimming pools etc..
Use method: surfaces to be coated should be dry and clean.
Application: paint brush/roller, spray, airless.
|
|
| POOLFLEX 1K 40 |
Single-component flexible waterproofing coating, based on chlorine-sulphonate polyethylene (Hypalon-Du Pont) that cures when in contact with the atmosphere’s humidity. Resistant to the weather but have good permeability to steam and gas. Resistant to chemical and atmospheric agents, ozone-stable. Excellent resistance to abrasion.
Very suitable for waterproofing, anti-corrosion treatment of any concrete surface, bridges, viaducts, aqueducts, sea platforms, cement roofs, chemical plants, (suitable for containing drinking water), etc...
POOLFLEX 1K 40 can also be used in recovery and protection paintwork (after priming with PRIMER PU 10/274) of surfaces covered with bitumen sheets allowing lengthen by far the underlayer’s life.
Use method: clean the surface thoroughly by removing any residue of grease, wax, oil and dirty in general.
Application: this product is very suitable for coating.
|
|
| KEMIEPUR 1K 20/240 |
Single-component aliphatic polyurethane paint vernice, hygrohardening (reticulates under effect of atmospheric moisture), transparent and glazing paint. Characterized by high superficial hard, abrasion and chalking resistant due to long sun exposure. Suitable for a lasting protection of every mural surface against aggression of chemical agents (acid and alkaline solutions, sea atmosphere, sulphurous anhydride, solvents, oils, etc…) and against concrete carbonation. High power anti-scratch.
After reticulation the product forms a transparent, anti-dust film that is very hard, elastic, transparent (anti-yellowing), it endures for a long time and writings or dirtiness are easy to clean (anti-writing
paint) using strong detergents or organic solvents. KEMIEPUR 1K 20/240 opposes an impenetrable barrier against these substances.
Use method: grease on surfaces should be removed; presence of dampness can prejudge film appearance.
Application: spray, paint brush, paint roller.
|
|
| KEMIESIL 1K EG |
Single-component product based on siloxane oligomers and hydroreactive silicic esters, water-reactive. Suitable for water-repellent protection of building materials as beton, bricks, cement plasters, natural stones, etc.. It makes a chemical barrier that stops the rising humidity.
Peculiarities of this product can be resumed as follows:
- High penetration in the support without changing the appearance
- Stability to acids and alkaline solutions
- It hinders the formation of seaweeds, moulds, saline efflorescence
- It shelters the support from aggression produced by industrial and sea atmosphere, acid rains, etc..
- It can be painted with water and solvents products
- High length in time
Use method: the support should be accurately cleaned by brushing in order to remove all efflorescence.
Cement plaster should be removed at least 20 cm. from floor or from point where the barring takes place.
Application: should be applied by injection with suitable injectors and low-pressure pump.
|
|
| KEMIESIL 1K ML |
Single-component formula with silicone resins, siloxane, silane, and organic polymers, studied for waterproofing of horizontal surfaces such as terraces, balconies etc…The product eliminates water leaks without altering the appearance and transpirability of the backing.
Use method: apply the product on clean and dry surfaces.
Application: should be applied by spraying using low-pressure sprayers or with paint-brush.
|
|
| POOLFLOOR 1K |
Single-component coating formuled with particular synthetic resins in hydro alcoholic solution. Waterproof but permeable to steam; perspiration of the support. Suitable for coating wet floors, swimming pools (also with back pressure), concrete floors, walls made of bricks, tuff or others stone materials, wood, bituminous coatings
Good resistance to abrasion and excellent support adhesion, no tendence to exfoliation; it can be used to paint surfaces suitable for trolley (supermarkets, wherehouses, etc…).
Use method: clean the surface thoroughly by removing any residue of grease.
Application: paint brush, roller, airless.
|
|
| PRIMER PU 10/274 |
Two-component, transpirant, epoxy-cement based on synthetic resins in water solution and actives chages. Waterproof but permeable to steam, suitable for aiding the adhesion of resin-based finish coatings, on any stone and cement material, on ceramic tiles, mosaics, gres, wood, etc…Used for waterproofing terraces, cement tins (suitable to contain drinking water, oil, feed products), basins etc..
Application: brush, roller |
|
| KEMIEPOX STUCCO/16 |
Epoxy formula in paste, free from solvents and plasticising, no shrinkage, suitable for the structural bonding of cement, iron, stone, terracotta, and for sealing, anchorage, smoothing, etc.
Use method: clean the surface thoroughly by removing any residue of dust, dirty and friable parts. Mix the base with the hardener.
Application: spatula also in vertical surfaces and on ceiling.
|
|
|
